Water Tank Water Proofing

Product Description

METHOD OF USE:-

(1)  SURFACE PREPARATION:- Surface Should Be Dry, Clean, Even And FreeFrom Dust, Dirt, Paint,

Rust, Algee, Grease, Soluble Salt, Or Other Contaminations And DampFree. For Cleaning Use Hand Or Power

Tools And Cleaning Chemicals / Paint Remover And Then Use Rust RemoverOr Sand Blasting Wherever

Required.(2 Apply primer coat on prepared surface)Apply Putty IfRequired  (3) Before drying of seal Coat Coat.

And allow itto cure for  72 hours. If required fastsetting give heat to epoxy as per instruction

ofmanufacturer.