Anchore Grout

About Anchore Grout

With an objective to serve clients in best possible manner, we have been affianced in providing top notch grade Anchore Grout. This grout is ideal for grouting inserts into concrete surface in construction industry. The offered grout is also known for bonding ceramic, stone and wood etc. In addition to this, the provided Anchore Grout can be bought from us at industrial leading prices. Key Points: Known for high strength Corrosion resistanceIdeal to dry or damp concrete Ruggedness BOND GROUT POAG - 01 POLYESTER ANCHOR GROUT POLYESTER ANCHOR GROUT It is two pack polyester resin based anchoring or grouting material used in the form of mortar. Part-A & B are mixed before use in overhead or horizontal applications. The thyrotrophic consistency of the mix prevents the grout from flowing out of the hole. WHERETOUSE: - Uses Foundation bolts base and stress anchor plates Tie-back anchors Overhead rail tracks Starter bars and dowels Advantages Rapid strength gainVibration resistantCorrosion resistantNon - expansive Can be placed under water SURFACE PREPARATION: - Ensure all the sides are roughened and dust free. To clean the holes thoroughly, using oil free compressed air. Thoroughly flush the substrate with water. Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contaminations METHOD OF USE: -Pour Part-A into a pan. Add Part-B from the tin container. Mix the two to produce a smooth thixotropic paste. Mixing may be carried out mechanically or manually using gloved hands. Pour the mix into the hole and fasten the bolts, hooks or anchors. For cleaning use hand or power tools and cleaning chemicals / paint remover and then use rust remover or sand blasting wherever required. EPAG-01 packs have been designed to produce practical and economic volumes of grout. Do not mix partial pack components PROPERTIES POAG-01 TYPE POLYESTER ANCHOR GROUT Consistancy Mortar Mortar Gel Time 30 minutes Compressive Strength 3 Hrs 20 Mpa Compressive Strength 7 Days: 70 Mpa After the minimum time required for loading the grout, it attains a compressive strength 20N/mm2 3 hrs and a final compressive strength of 70N/mm2 in 7 days Coverage 1 kg PEAG-01 yields 0.5 litres approx Gel Temp. Gel time 30 Degree C 40-45 min 40 Degree C 15-20 min Min Time Required Before Loading (hrs) 2-3 1 STORAGE LIFE 6 Months